{"id":3875,"date":"2016-12-09T13:50:19","date_gmt":"2016-12-09T19:50:19","guid":{"rendered":"https:\/\/wp.stolaf.edu\/chemical-hygiene\/?page_id=3875"},"modified":"2024-08-25T14:11:36","modified_gmt":"2024-08-25T19:11:36","slug":"preventing-aerosol-production","status":"publish","type":"page","link":"https:\/\/wp.stolaf.edu\/chemical-hygiene\/preventing-aerosol-production\/","title":{"rendered":"Preventing Aerosol Production"},"content":{"rendered":"<div data-modular-content-collection><p>Aerosols are liquid and solid particles suspended in the air. \u00a0An aerosol with a diameter of 5 microns or less can remain airborne for a long period of time, spread wide distances, and is easily inhaled. \u00a0Particles with a diameter larger than 5 microns tend to settle rapidly and can contaminate skin, other surfaces, and ventilation systems.<br \/>\nOver the years, there have been many documented cases of lab personnel acquiring diseases due to their work with infectious agents. \u00a0Approximately 80% of these cases are assumed to be primarily related to the creation of aerosols in the lab. \u00a0Whenever work with potentially infectious agents is performed, appropriate measures must be taken to protect workers and the environment. \u00a0This page (modified from <a href=\"http:\/\/www.dehs.umn.edu\/PDFs\/aerosol.pdf\" target=\"_blank\" rel=\"noopener noreferrer\">Univ. MN website<\/a>) describes aerosol producing activities and safe work practices to protect workers from aerosols.<\/p>\n<hr \/>\n<span class=\"collapseomatic arrowleft\" id=\"id69e36b366c27f\"  tabindex=\"0\" title=\"&lt;strong&gt;RECOGNIZE: Examples of Aerosol-Producing Activities in the Lab:&lt;\/strong&gt;\"    ><strong>RECOGNIZE: Examples of Aerosol-Producing Activities in the Lab:<\/strong><\/span><div id=\"target-id69e36b366c27f\" class=\"collapseomatic_content \">\n<ul>\n<li>carelessly removing gloves<\/li>\n<li>pouring liquids<\/li>\n<li>removing (&#8220;popping off&#8221;) stoppers<\/li>\n<li>opening lyophilized cultures, snap top tubes, bottles<\/li>\n<li>blowing out pipettes<\/li>\n<li>shaking or vortexing open tubes, stirring<\/li>\n<li>dropping\/breakage of culture containers<\/li>\n<li>flaming inoculating needles, loops, or slides<\/li>\n<li>inserting a hot loop into a culture<\/li>\n<li>pulling needles out of septums, filling a syringe<\/li>\n<li>centrifugation steps such as filling centrifuge tubes, removing plugs or caps from tubes after centrifugation, removing supernatant, resuspending sedimented pellets, breakage of tubes during centrifugation, and centrifugation itself<\/li>\n<li>sonicating, homogenizing, blending, grinding, cell disruption with French press<\/li>\n<li>cell sorters<\/li>\n<li>vacuum and aspirating equipment<\/li>\n<li>intranasal inoculation of animals<\/li>\n<li>cage cleaning, changing animal bedding<\/li>\n<li>harvesting infected material from animals, eggs, and other virology procedures<\/li>\n<li>necropsies of infected animals<\/li>\n<\/ul>\n<\/div>\n<hr \/>\n<h6>Safe Work Practices to Minimize the Creation of and Exposure to Aerosols:<\/h6>\n<p>Laboratory workers should learn and follow (as appropriate) these practices. \u00a0Using a combination of the appropriate safety equipment and safe procedures is the primary method to minimize the creation of and exposure to aerosols.<\/p>\n<span class=\"collapseomatic arrowleft\" id=\"id69e36b366c376\"  tabindex=\"0\" title=\"&lt;strong&gt;Lab Safety Equipment to Protect Personnel from Aerosols&lt;\/strong&gt;\"    ><strong>Lab Safety Equipment to Protect Personnel from Aerosols<\/strong><\/span><div id=\"target-id69e36b366c376\" class=\"collapseomatic_content \">\n<ul>\n<li>A\u00a0certified biological safety cabinet (class I or II) is the primary barrier to protect worker from aerosols if working with RG2 or higher agents. \u00a0Other safety devices include safety centrifuges with automatic locking mechanisms or solid lids, safety centrifuge cups, safety blenders, safety sonicators.<\/li>\n<li>Vacuum line trap and filter systems are used to protect the vacuum system from aerosols.<\/li>\n<\/ul>\n<\/div><br class=\"none\" \/><br class=\"none\" \/><span class=\"collapseomatic arrowleft\" id=\"id69e36b366c3c9\"  tabindex=\"0\" title=\"&lt;strong&gt;Safe Work Practices for Centrifugation&lt;\/strong&gt;\"    ><strong>Safe Work Practices for Centrifugation<\/strong><\/span><div id=\"target-id69e36b366c3c9\" class=\"collapseomatic_content \">\n<ul>\n<li>Routinely inspect centrifuge to ensure that leakage is not occurring.<\/li>\n<li>Do not overfill centrifuge tubes. \u00a0Wipe the outside of the tubes with disinfectant after they are filled and sealed.<\/li>\n<li>Centrifugation may be performed in a centrifuge that is contained within a specially designed biological safety cabinet or other physical containment device.<\/li>\n<li>If a whole centrifuge containment device is not available, internal aerosol containment devices (e.g., sealed canisters, safety cups or buckets with covers, heat sealed tubes or sealed rotors, etc) should be used.<\/li>\n<li>Aerosol containment devices should be removed from the centrifuge and opened in a biological safety cabinet. \u00a0If a biological safety cabinet is unavailable, a minimum of 10 minutes settling time should be allowed before opening.<\/li>\n<\/ul>\n<\/div><br class=\"none\" \/><br class=\"none\" \/><span class=\"collapseomatic arrowleft\" id=\"id69e36b366c413\"  tabindex=\"0\" title=\"&lt;strong&gt;Safe Work Practices for Blending, Sonicating, Grinding, and Lyophilizing&lt;\/strong&gt;\"    ><strong>Safe Work Practices for Blending, Sonicating, Grinding, and Lyophilizing<\/strong><\/span><div id=\"target-id69e36b366c413\" class=\"collapseomatic_content \">\n<ul>\n<li>Allow aerosols to settle for at least 5 minutes before opening blender.<\/li>\n<li>Operate blender, sonicator, and grinder in a biological safety cabinet, or place a towel moistened with disinfectant over the top of blender, grinder, or sonicator.<\/li>\n<li>Use safety blenders designed to prevent leakage.<\/li>\n<li>If leak-proof blender is not available, regularly inspect the bottom of the blender for leakage.<\/li>\n<li>Avoid glass blenders.<\/li>\n<li>Filter lyophilizer vacuum pump exhaust through HEPA filters or vent into a biological safety cabinet.<\/li>\n<li>Autoclave or disinfect all equipment promptly after use.<\/li>\n<\/ul>\n<\/div><br class=\"none\" \/><br class=\"none\" \/><span class=\"collapseomatic arrowleft\" id=\"id69e36b366c454\"  tabindex=\"0\" title=\"&lt;strong&gt;Safe Work Practices for Pipetting&lt;\/strong&gt;\"    ><strong>Safe Work Practices for Pipetting<\/strong><\/span><div id=\"target-id69e36b366c454\" class=\"collapseomatic_content \">\n<ul>\n<li>Drain a pipette with tip against the inner wall of the receiving vessel. \u00a0Never forcibly expel any hazardous material from a pipette.<\/li>\n<li>Carefully eject\u00a0the disposable pipette tips to minimize aerosol formation. \u00a0A wetted towel in the bottom of the dispensing container (which is often a glass beaker) will keep the pipette tip from bouncing around in the container, thereby minimizing aerosol production.<\/li>\n<li>Place reusable pipettes horizontally in a pan filled with enough liquid disinfectant to completely cover them.<\/li>\n<li>Mouth pipetting is prohibited; mechanical pipetting devices are used.<\/li>\n<\/ul>\n<\/div><br class=\"none\" \/><br class=\"none\" \/><span class=\"collapseomatic arrowleft\" id=\"id69e36b366c48e\"  tabindex=\"0\" title=\"&lt;strong&gt;Other Safety Precautions&lt;\/strong&gt;\"    ><strong>Other Safety Precautions<\/strong><\/span><div id=\"target-id69e36b366c48e\" class=\"collapseomatic_content \">\n<ul>\n<li>Minimize air bubbles when filling a syringe. \u00a0Place a pad moistened with disinfectant over the tip of the needle when expelling air.<\/li>\n<li>Use a shielded electric incinerator or hot bead sterilizer to sterilize inoculating loops. \u00a0Disposable plastic loops and culture needles are good alternatives to open flames.<\/li>\n<li>If a spill occurs that may generate aerosols, leave the area, close the door, wait 30-60 minutes to allow dissipation of aerosols. \u00a0See <a href=\"https:\/\/wp.stolaf.edu\/chemical-hygiene\/biological-spills-decontamination-clean-up\/\">https:\/\/wp.stolaf.edu\/chemical-hygiene\/biological-spills-decontamination-clean-up\/<\/a> for spill cleanup.<\/li>\n<li>Wear gloves when handling infectious materials, or infected animals.<\/li>\n<li>For animal work follow CDC Biosafety in Microbiological and Biomedical Laboratories <strong><a href=\"http:\/\/www.cdc.gov\/biosafety\/publications\/bmbl5\/BMBL5_sect_V.pdf\" target=\"_blank\" rel=\"noopener noreferrer\">animal biosafety level criteria<\/a><\/strong>.<\/li>\n<\/ul>\n<\/div>\n<p><!-- begin-migrated-from-panel-builder --><!-- end-migrated-from-panel-builder --><\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"<p>Aerosols are liquid and solid particles suspended in the air. \u00a0An aerosol with a diameter of 5 microns or less can remain airborne for a long period of time, spread [&hellip;]<\/p>\n","protected":false},"author":156,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"class_list":["post-3875","page","type-page","status-publish","hentry"],"acf":[],"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/wp.stolaf.edu\/chemical-hygiene\/wp-json\/wp\/v2\/pages\/3875","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wp.stolaf.edu\/chemical-hygiene\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/wp.stolaf.edu\/chemical-hygiene\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/wp.stolaf.edu\/chemical-hygiene\/wp-json\/wp\/v2\/users\/156"}],"replies":[{"embeddable":true,"href":"https:\/\/wp.stolaf.edu\/chemical-hygiene\/wp-json\/wp\/v2\/comments?post=3875"}],"version-history":[{"count":22,"href":"https:\/\/wp.stolaf.edu\/chemical-hygiene\/wp-json\/wp\/v2\/pages\/3875\/revisions"}],"predecessor-version":[{"id":5837,"href":"https:\/\/wp.stolaf.edu\/chemical-hygiene\/wp-json\/wp\/v2\/pages\/3875\/revisions\/5837"}],"wp:attachment":[{"href":"https:\/\/wp.stolaf.edu\/chemical-hygiene\/wp-json\/wp\/v2\/media?parent=3875"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}